Electron Energy-Loss Spectroscopy Study of the Change in the Free-Electron Density in Thin Superconducting NbN Films under Ion-Beam Irradiation

The change in the free-electron density in ultrathin (5 nm) superconducting NbN films in the initial state and after irradiation by O⁺ ions to doses of (0.1–0.9) × 10¹⁷ cm^–2 has been studied by electron energy-loss spectroscopy (EELS). The analysis has been performed on cross section samples prepared by the focused ion beam method, using plasmon oscillations with energies up to 50 eV. The radiation-induced replacement of nitrogen atoms with oxygen atoms in niobium nitride is found to change the electrical properties of the material, which leads to a decrease in the free-electron density with an increase in the irradiation dose.     

(111)择优取向ZnS薄膜的制备及特性研究

采用激光分子束外延技术在Al2O3衬底上成功外延生长了ZnS薄膜.用X射线衍射、扫描电子显微镜和光致发光谱表征了衬底温度对薄膜结构、形貌和光学特性的影响.结果表明所生长的ZnS薄膜为闪锌矿,具有(111)择优长向,随衬底温度的升高,X射线衍射峰的半高宽先减小后增大,在衬底温度为300℃时,半高宽最窄.薄膜结构致密,表面不平整度随衬底温度的升高而增大.薄膜的带隙随衬底温度的升高出现蓝移,可见光区域透射率最高达到98;,在360 nm激发波长下,观测到402 nm和468 nm两个发光带,衬底温度为300℃时,发光最强.     

Nanocomposite hydrogel consisting of Na‐montmorillonite with enhanced mechanical properties

A new kind of nanocomposite (NC) hydrogel with Na‐montmorillonite (MMT) is presented in this article. The NC hydrogels were synthesized by free radical copolymerization of acrylamide and (3‐acrylamidopropyl) trimethylammonium chloride (ATC) in the presence of MMT and N,N′‐methylene‐bis‐acrylamide used as chemical cross‐linker. Due to the cation‐exchange reaction between MMT and ATC (cationic monomer) during the synthesis of NC hydrogels, MMT platelets were considered chemical “plane” cross‐linkers, different from “point” cross‐linkers. With increasing amount of MMT, the crosslinking degree enhanced, causing a decrease of the swelling degree at equilibrium. Investigations of mechanical properties indicated that NC hydrogels exhibited enhanced strength and toughness, which resulted from chemical interaction between exfoliated MMT platelets and polymer chains in hydrogels. Dynamic shear measurements showed that both storage modulus and loss modulus increased with increasing MMT content. The idea described here provided a new route to prepare hydrogels with high mechanical properties by using alternative natural Na‐MMT. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1020–1026     

Unfamiliar Aspects of Bäcklund Transformations and an Associated Degasperis–Procesi Equation

We summarize the results of our recent work on Bäcklund transformations (BTs), particularly focusing on the relation between BTs and infinitesimal symmetries. We present a BT for an associated Degasperis–Procesi (aDP) equation and its superposition principle and investigate the solutions generated by applying this BT. Following our general methodology, we use the superposition principle of the BT to generate the infinitesimal symmetries of the aDP equation.     

New Effects in the Poly-N-Vinylcaprolactam/Titanium(IV) Oxides Nanocomposite System and Their Nature

Nanocomposites based on poly-N-vinylcaprolactam (PVC), characterized by different drying temperatures of aqueous PVC solution at 25°С (PVC25) and 40°С (PVC40), with titanium(IV) oxide nanoparticles (TONs) (η-phase (TP: TiO_{2 – x} · mH₂O) with a superstructure to the anatase structure and ordered solid solution with partial replacement of oxygen atoms in the η-phase with peroxo group O ₂ ^2– (PP: TiO _x (O₂)_{2 – x} · nH₂O)) have been obtained for the first time and characterized by X-ray diffraction and IR spectroscopy. It is found that a common feature of TP/PVC and PP/PVC obtained by dry mixing and grinding is the decrease in the number of water molecules for TP and PP in the interlayer space of the structure and their attachment to the PVC amide groups; the differences are related to the specificity of PVC behavior in these systems: mechanodestruction of PVC in PP/PVC40 and different numbers of water molecules in PVC25 and PVC40.